Goldner’s Trichrome for Muscle and Collagen

By Carmen WongProtocols, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Goldner's Trichrome

for Muscle and Collagen

steps

materials

print

Materials

Weigert’s iron hematoxylin or equivalent
Solution A
Material Variation 1 Variation 2 Variation 3
Ponceau 2R 0.7 g 0.75 g –
Acid fuchsin 0.3 g 0.25 g –
Azophloxine – 0.1 g 5 g
Acetic acid, glacial 2 mL 2 mL 2 mL
Distilled water 1 L 1 L 1 L
Solution B
Material Amount
Acetic acid, glacial 10 mL
Distilled water 1 L
Solution C
Material Amount
Orange G 20 g
Phosphomolybdic acid 40 g
Distilled water 1 L
Solution D
Material Amount
Light green SF 2 g
Acetic acid, glacial 2 mL
Distilled water 1 L

Material	Variation 1	Variation 2	Variation 3
Ponceau 2R	0.7	g	0.75	g	–
Acid fuchsin	0.3	g	0.25	g	–
Azophloxine	–		0.1	g	5	g
Acetic acid, glacial	2	mL	2	mL	2	mL
Distilled water	1	L	1	L	1	L

Material	Amount
Acetic acid, glacial	10	mL
Distilled water	1	L

Material	Amount
Orange G	20	g
Phosphomolybdic acid	40	g
Distilled water	1	L

Material	Amount
Light green SF	2	g
Acetic acid, glacial	2	mL
Distilled water	1	L

Tissue Sample

5µ paraffin sections of neutral buffered formalin fixed tissue are suitable. Other fixatives are likely to be satisfactory. Most trichrome stains benefit from picric acid or mercuric chloride fixation.

Protocol

Bring sections to water via xylene and ethanol.
Stain nuclei with Weigert’s iron hematoxylin, or equivalent.
Place into one of the variants of solution A for 5 minutes.
Rinse with solution B.
Place into solution C until collagen is decolorised.
Rinse with solution B.
Place into solution D for 5 minutes.
Place into solution B for 5 minutes.
Blot.
Dehydrate rapidly with absolute ethanol.
Clear with xylene and mount with a resinous medium.

Expected Results

Nuclei – black
Erythrocytes – orange
Cytoplasm – red
Collagen – green

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Gray, Peter. (1954)
The Microtomist’s Formulary and Guide.
Originally published by: The Blakiston Co.
Republished by: Robert E. Krieger Publishing Co.

March 30, 2023

Love0

Masson’s HES General Oversight Stain

By Carmen WongProtocols, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Masson's HES

General Oversight Stain

steps

materials

print

This is also known as the Hematoxylin Erythrosine Saffron stain.

Materials

Regressive hemalum
Solution A
Material Amount
Erythrosine B 1 g
Tap water 100 mL
Dissolve the erythrosine B and filter. Preserve with a few drops drops of chloroform.
Solution B
Material Amount
Saffron 2 g
Distilled water 100 mL
Strong formalin 1 mL
Tannic acid, 5% aqueous 1 mL
Add the saffron stigmata to the water and heat in a boiling water bath for one hour. Filter, and add the formalin and tannic acid. Life is a few weeks.

Material	Amount
Erythrosine B	1	g
Tap water	100	mL

Material	Amount
Saffron	2	g
Distilled water	100	mL
Strong formalin	1	mL
Tannic acid, 5% aqueous	1	mL

Tissue Sample

No particular fixative was specified. 5 µ paraffin sections of neutral buffered formalin fixed tissue are suitable but results may be improved by refixing in Bouin’s fixative or saturated aqueous picric acid at 56°C for one hour prior to staining, then washing the sections in tap water to remove all yellow discoloration.

Protocol

Bring sections to water with xylene and ethanol.
Treat with Bouin’s fluid if desired.
Stain nuclei with hemalum, differentiate and blue.
Wash well with water.
Place in solution A for 2-5 minutes.
Wash rapidly with tap water.
Differentiate erythrosine with 70% ethanol for a few seconds to decolorize collagen.
Wash rapidly with tap water.
Place into solution B for 5 minutes.
Wash rapidly with tap water.
Dehydrate rapidly with absolute ethanol.
Clear with xylene and mount with a synthetic resinous medium.

Expected Results

Nuclei – blue
Cytoplasm – red shades
Muscle – pink
Elastic fibres – pink
Collagen – orange-yellow

Notes

Saffron is expensive. It may be available in East Indian grocery stores or health food stores as its most common use today is as a spice and food coloring. Usually, whole stigmata are more effective than ground saffron.
Eosin B or phloxine B may be substituted for erythrosine B.

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Biological Staining Methods, 6th ed. (1957)
Gurr, G. T.,
George T. Gurr, London, UK
Gray, Peter. (1954)
The Microtomist’s Formulary and Guide.
Originally published by: The Blakiston Co.
Republished by: Robert E. Krieger Publishing Co.

March 30, 2023

Love0

Picro-Mallory for Fibrin – Shorter Version

By Carmen WongFibrin, Protocols, Stain Target, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Picro-Mallory

for Fibrin – Shorter Version

steps

materials

print

This version of the picro-Mallory is relatively uncomplicated and is suitable for a routine pathology laboratory. Proper fixation is still essential and minimalist formalin fixation with quick processing should be avoided as it will give disappointing results with poorly stained erythrocytes. Originally, extended mercury fixation, thorough processing, degreasing and refixing in picro-mercuric-ethanol were specified. Although fixation in formol sublimate (or B5) is preferred for this method as well, adequate results can be obtained with overnight formalin fixation and overnight processing. Refixation of sections in Bouin’s fluid at 56°C for an hour or so overcomes some of the deficiencies in fixation, but results are still inferior to those obtained by the full procedure.

Materials

An acid resistant nuclear stain, such as Weigert’s iron hematoxylin, or the celestine blue-hemalum sequence.
Picro-orange
Material Amount
Picric acid, sat. in 80% ethanol 100 mL
Orange G 0.2 g
Yellow differentiator
Material Amount
Picro-orange 30 mL
Ethanol, 80% 70 mL
Red stain
Material Amount
Acid fuchsin 1 g
Acetic acid, glacial 1 mL
Distilled water 99 mL
Red differentiator
Material Amount
Phosphotungstic acid 1 g
Distilled water 100 mL
Blue stain
Material Amount
Methyl blue 2 g
Acetic acid, glacial 2 mL
Distilled water 98 mL

Material	Amount
Picric acid, sat. in 80% ethanol	100	mL
Orange G	0.2	g

Material	Amount
Picro-orange	30	mL
Ethanol, 80%	70	mL

Material	Amount
Acid fuchsin	1	g
Acetic acid, glacial	1	mL
Distilled water	99	mL

Material	Amount
Phosphotungstic acid	1	g
Distilled water	100	mL

Material	Amount
Methyl blue	2	g
Acetic acid, glacial	2	mL
Distilled water	98	mL

Tissue Sample

3 mm slices of tissue should be fixed in formol sublimate (or B5) overnight. Paraffin process overnight. Avoid rapid fixation with formalin and short processing, as this produces tissues that stain poorly even with the secondary fixation specified. Sections should be 3-5 µ thick.

Protocol

Bring sections to water via xylene and ethanol.
Remove mercury pigment with the iodine-thiosulphate sequence.
Place into Bouin’s fluid at 56°C for 1 hour.
Rinse well in distilled water.
Stain nuclei with an acid resistant nuclear stain.
Rinse with 95% ethanol.
Place in picro-orange for 2 minutes.
Without rinsing, place in the red stain for 5 minutes.
Rinse with distilled water.
Dip into yellow differentiator.
Rinse in distilled water.
Differentiate with the red differentiator for 5 minutes.
Rinse with distilled water.
Place in the blue stain for 2 minutes.
Rinse briefly with 1% aqueous acetic acid.
Dehydrate with ethanol.
Clear with xylene and mount with a resinous medium.

Expected Results

Fibrin – clear red
Fibrinoid – varies from red to orange
Erythrocytes – orange
Connective tissue – blue

Notes

If possible, the extended fixation and slow processing specified for the longer version should be used. Degreasing and refixation will also improve results if time allows.

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Culling C.F.A., (1974)
Handbook of histopathological and histochemical techniques Ed. 3
Butterworth, London, UK.

March 30, 2023

Love0

Picro-Mallory for Fibrin – Long Version

By Carmen WongFibrin, Protocols, Stain Target, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Picro-Mallory

for Fibrin – Long Version

steps

materials

print

Lendrum, Fraser and others published several fibrin stains, the most well known being the Picro-Mallory. There are several variants of the method, some more complicated than others.

See this alternative protocol for a shorter version.

With this trichrome stain full and complete fixation is absolutely essential. Minimalist formalin fixation and quick processing will give poorly stained erythrocytes with red or orange tinges instead of the yellow they should have. Lendrum and coworkers specified about seven days fixation in formal sublimate followed by processing thoroughly, sectioning, degreasing with trichlorethylene for 48 hours, then refixing in picro-mercuric-alcohol. Adequate results can be obtained with thorough formalin fixation (24 hours), thorough processing (overnight), sectioning, followed by refixing in Bouin’s fluid at 56°C for an hour or so. However, results are inferior to those obtained by the full procedure. It is also a method where experience is required for optimal results.

Materials

An acid resistant nuclear stain, such as Weigert’s iron hematoxylin, or the
celestine blue-hemalum sequence.
Yellow mordant
Material Amount
Picric acid, sat. in 80% ethanol 100 mL
Orange G 0.2 g
Lissamine yellow 0.2 g
Stock differentiator
Material Amount
Picric acid 2.5 g
Ethanol, 95% 100 mL
Phosphotungstic acid 25 g
Dissolve ingredients and filter.
Red differentiator
Material Amount
Stock differentiator 40 mL
Ethanol, 95% 20 mL
Distilled water 90 mL
Blue differentiator
Material Amount
Stock differentiator 10 mL
Distilled water 90 mL
Red stain
Material Option 1 Option 2 Option 3
Acid fuchsin 1 g – 0.4 g
Lissamine fast red – – 0.2 g
Biebrich scarlet – 1 g –
Acetic acid, glacial 1 mL 1 mL 1 mL
Distilled water 99 mL 99 mL 99 mL
Blue stain
Material Amount
Methyl blue 1 g
Acetic acid, glacial 1 mL
Distilled water 99 mL

Material	Amount
Picric acid, sat. in 80% ethanol	100	mL
Orange G	0.2	g
Lissamine yellow	0.2	g

Material	Amount
Picric acid	2.5	g
Ethanol, 95%	100	mL
Phosphotungstic acid	25	g

Material	Amount
Stock differentiator	40	mL
Ethanol, 95%	20	mL
Distilled water	90	mL

Material	Amount
Stock differentiator	10	mL
Distilled water	90	mL

Material	Option 1	Option 2	Option 3
Acid fuchsin	1	g	–	0.4	g
Lissamine fast red	–	–	0.2	g
Biebrich scarlet	–	1	g	–
Acetic acid, glacial	1	mL	1	mL	1	mL
Distilled water	99	mL	99	mL	99	mL

Material	Amount
Methyl blue	1	g
Acetic acid, glacial	1	mL
Distilled water	99	mL

Tissue Sample

3 mm slices of tissue should be fixed in formol sublimate for one week. They should be paraffin processed with a schedule that thoroughly and completely dehydrates, then thoroughly cleared with xylene and infiltrated with paraffin wax. This process would normally take 48 hours or longer. Err on the side of completeness, and do not attempt to shorten the process. Avoid rapid fixation and overnight processing, especially with formalin fixatives, as this produces tissues that stain poorly even with secondary fixation such as Bouin’s fluid at 56°C for an hour. Sections should be 3-5 µ thick.

Protocol

Bring sections to water via xylene and ethanol.
Remove mercury pigment with the iodine-thiosulphate sequence.
Stain nuclei with an acid resistant nuclear stain.
Place in yellow mordant for 2-3 minutes.
Wash in distilled water until only erythrocytes are yellow.
Place in the red stain for 5-10 minutes.
Rinse with 1% aqueous acetic acid.
Differentiate with the red differentiator until fibrin is prominent microscopically.
Rinse well in distilled water.
Place in the blue stain for 5 minutes.
Rinse briefly with 1% aqueous acetic acid.
Place in the blue differentiator for 1-2 minutes.
Biefly rinse with 1% aqueous acetic acid.
Dehydrate with ethanol.
Clear with xylene and mount with a resinous medium.

Expected Results

Fibrin – clear red
Erythrocytes – yellow
Connective tissue – blue

Notes

The most common dye combination is acid fuchsin and methyl blue.
Adequate results may be obtained with 24-48 hours fixation in neutral buffered formalin, overnight paraffin processing and secondary fixation of sections with Bouin’s picro-formol-acetic for 1 hour at 56°C.
Good results are obtained with the fixation and processing recommended in the text.
Optimal results are obtained with the fixation and processing recommended in the text, followed by degreasing and secondary fixation in picro-mercuric ethanol.
Replace step 1 with the following:
1. Dewax sections with xylene.
2. Place in trichlorethylene in a sealed container at 56°C for 48 hours.
3. Rinse sections well with absolute ethanol.
4. Place in picro-mercuric-ethanol for 24 hours.
5. Wash sections with water, and continue from step 2.

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Lendrum, A. C., et. al. (1962)
Studies on the character and staining of fibrin.
Journal of clinical pathology, v. 15, p. 401.

March 30, 2023

Love0

Obadiah for Fibrin

By Carmen WongFibrin, Protocols, Stain Target, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Obadiah

for Fibrin

steps

materials

print

The name of this stain comes from the letters OBDR45, which refer to the dyes used: Orange, Blue, Direct Red 45 (a synonym for one of the red dyes).

With this trichrome stain full and complete fixation is absolutely essential. Minimalist formalin fixation and quick processing will give poorly stained erythrocytes with red or orange tinges instead of the yellow they should have. Lendrum and coworkers specified about seven days fixation in formal sublimate followed by processing thoroughly, sectioning, degreasing with trichlorethylene for 48 hours, then refixing in picro-mercuric-alcohol. Results are usually poor with formalin fixed material, even if treated with Bouin’s fluid at 56°C for an hour or so.

Materials

An acid resistant nuclear stain, such as Weigert’s iron hematoxylin, or the celestine blue-hemalum sequence.
Picro-mercuric ethanol
Material Amount
Ethanol, absolute 100 mL
Picric acid to saturation
Mercuric chloride to saturation
Orange
Material Amount
Orange G 0.5 g
Phosphotungstic acid 1 g
Ethanol, 95% 100 mL
Blue
Material Amount
Naphthalene blue black CS 1 g
Acetic acid, glacial 1 mL
Distilled water 99 mL
Red – Option 1
Material Amount
Chicago red 2.5 g
Acetic acid, glacial 2.5 mL
Distilled water 97.5 mL
Red – Option 2
Material Amount
Polar brilliant red BN 1 g
Acetic acid, glacial 1 mL
Distilled water 99 mL

Material	Amount
Ethanol, absolute	100	mL
Picric acid	to	saturation
Mercuric chloride	to	saturation

Material	Amount
Orange G	0.5	g
Phosphotungstic acid	1	g
Ethanol, 95%	100	mL

Material	Amount
Naphthalene blue black CS	1	g
Acetic acid, glacial	1	mL
Distilled water	99	mL

Material	Amount
Chicago red	2.5	g
Acetic acid, glacial	2.5	mL
Distilled water	97.5	mL

Material	Amount
Polar brilliant red BN	1	g
Acetic acid, glacial	1	mL
Distilled water	99	mL

Tissue Sample

3 mm slices of tissue should be fixed in formol sublimate for one week. They should be paraffin processed with a schedule that thoroughly and completely dehydrates, then thoroughly cleared with xylene and infiltrated with paraffin wax. This process would normally take 48 hours or longer. Err on the side of completeness, and do not attempt to shorten the process. Avoid rapid fixation and overnight processing, as this produces tissues that stain poorly. Sections should be 3-5 µ thick.

Protocol

Dewax sections with xylene.
Place into a sealed container of trichlorethylene at 56°C for 48 hours.
Rinse well with absolute ethanol.
Refix sections in picro-mercuric-ethanol for a minimum of 3 and preferably 24 hours.
Remove mercury pigment with the iodine-thiosulphate sequence.
Stain nuclei with an acid resistant nuclear stain.
Place in the orange stain for 2 minutes.
Rinse with distilled water.
Place in the Blue stain up to 30 minutes.
Differentiate with the polyacid for 5 minutes.
Place in the Red stain 15-20 minutes (polar brilliant red) or 15-30 minutes (chicago red).
Rinse with distilled water.
Dehydrate with ethanol.
Clear with xylene and mount with a resinous medium.

Expected Results

Old fibrin – black
Younger fibrin – may be yellow
Connective tissue – red

Notes

Note that this method reverses the usual order and uses a blue stain before the red stain.
Lendrum considered that this method demonstrated fibrin that other methods stained as collagen.

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Lendrum, A. C., et. al. (1962)
Studies on the character and staining of fibrin.
Journal of clinical pathology, v. 15, p. 401.

March 30, 2023

Love0

Martius, Scarlet and Blue (MSB) for Fibrin

By Carmen WongFibrin, Protocols, Stain Target, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Martius, Scarlet and Blue (MSB)

for Fibrin

steps

materials

print

The MSB (Martius, Scarlet and Blue) method for fibrin is a reliable technique. It is more automatic than other methods, i.e. it is less dependent on skill and experience and is consequently suitable for a routine laboratory. Overnight mercuric chloride fixation (formol sublimate or B5) is preferred, followed by overnight paraffin processing, although formalin fixed, paraffin embedded material can produce acceptable results if sections are refixed for an hour in Bouin’s picro-acetic-formalin mixture at 56°C. Optimal results are obtained with extended mercuric chloride fixation, thorough processing, degreasing and secondary fixation of sections, as for the Picro-Mallory.

Materials

An acid resistant nuclear stain, such as Weigert’s iron hematoxylin, or the celestine blue-hemalum sequence.
Martius
Material Amount
Martius yellow 0.5 g
Phosphotungstic acid 2 g
Ethanol, 95% 100 mL
Scarlet
Material Amount
Crystal scarlet 1 g
Acetic acid, glacial 2.5 mL
Distilled water 97.5 mL
Blue
Material Amount
Methyl blue 0.5 g
Acetic acid, glacial 1 mL
Distilled water 98 mL
Phosphotungstic acid
Material Amount
Phosphotungstic acid 1 g
Distilled water 100 mL

Material	Amount
Martius yellow	0.5	g
Phosphotungstic acid	2	g
Ethanol, 95%	100	mL

Material	Amount
Crystal scarlet	1	g
Acetic acid, glacial	2.5	mL
Distilled water	97.5	mL

Material	Amount
Methyl blue	0.5	g
Acetic acid, glacial	1	mL
Distilled water	98	mL

Material	Amount
Phosphotungstic acid	1	g
Distilled water	100	mL

Tissue Sample

3 mm slices of tissue should be fixed in formol sublimate (or B5) overnight. Paraffin process overnight. Overnight formalin fixation is usually satisfactory, but avoid rapid fixation with formalin and short processing, as this produces tissues that stain poorly even with the secondary fixation specified. Sections should be 3-5 µ thick.

Protocol

Bring sections to water via xylene and ethanol.
If mercury fixed, remove with the iodine-thiosulphate sequence.
If not mercury fixed, place into Bouin’s fluid at 56°C for 1 hour.
Rinse well in distilled water.
Stain nuclei with an acid resistant nuclear stain.
Rinse with 95% ethanol.
Place in martius yellow for 2 minutes.
Rinse with distilled water.
Place in crystal scarlet for 10 minutes.
Differentiate with phosphotungstic acid until only fibrin is red (up to 10 minutes).
Place in methyl blue until collagen is blue (up to 10 minutes).
Rinse briefly with 1% aqueous acetic acid.
Dehydrate rapidly with ethanol.
Clear with xylene and mount with a resinous medium.

Expected Results

Fibrin – red
Fresh fibrin – yellow
Erythrocytes – yellow
Connective tissue – blue

Notes

Crystal scarlet is more commonly known as ponceau 6R.
Steps 10 & 11 specify the time as up to. These times should be established by inspection, but will generally remain consistent.
Lendrum’s recommendation for formalin fixed material was to dewax sections and treat with trichlorethylene in a sealed contained for 48 hours at 56°C, then to refix in absolute ethanol saturated with both picric acid and mercuric chloride for 24 hours before proceeding to step 2. The alternative treatment with Bouin’s fluid given at step 3 is often satisfactory.
Bancroft notes that dyes other than those originally given may be used. Some may not be easily available, and no CI numbers were given.
Color Dye Options
Yellow Lissamine fast yellow
Blue Durazol blue
Pontamine sky blue
Fast green FCF
Naphthalene black 10B
Red Ponceau de xylidine
Azofuchsin

Color	Dye Options
Yellow	Lissamine fast yellow
Blue	Durazol blue Pontamine sky blue Fast green FCF Naphthalene black 10B
Red	Ponceau de xylidine Azofuchsin

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Drury, R.A.B. and Wallington, E.A., (1980)
Carleton’s histological technique Ed. 5
Oxford University Press, Oxford, UK.
Culling C.F.A., (1974)
Handbook of histopathological and histochemical techniques Ed. 3
Butterworth, London, UK.
Bancroft, J.D. and Stevens A. (1982)
Theory and practice of histological techniques Ed. 2
Churchill Livingstone, Edinburgh & London, UK.

March 30, 2023

Love0

Crossman’s Trichrome for Muscle and Collagen

By Carmen WongProtocols, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Crossman's Trichrome

for Muscle and Collagen

steps

materials

print

Materials

Solution A
Material Amount
Acid fuchsin 0.3 g
Orange G 2 g
Acetic acid, glacial 1 mL
Distilled water 100 mL
Thymol a small crystal
Solution B
Material Amount
Phosphomolybdic acid 1 g
Distilled water 100 mL
Solution C
- Option 1
  Material Amount
  Aniline blue 2 g
  Acetic acid, glacial 2 mL
  Distilled water 98 mL
- Option 2
  Material Amount
  Light green SF 1 g
  Acetic acid, glacial 1 mL
  Distilled water 99 mL
Solution D
Material Amount
Acetic acid, glacial 1 mL
Distilled water 99 mL

Material	Amount
Acid fuchsin	0.3	g
Orange G	2	g
Acetic acid, glacial	1	mL
Distilled water	100	mL
Thymol	a small crystal

Material	Amount
Phosphomolybdic acid	1	g
Distilled water	100	mL

Material	Amount
Aniline blue	2	g
Acetic acid, glacial	2	mL
Distilled water	98	mL

Material	Amount
Light green SF	1	g
Acetic acid, glacial	1	mL
Distilled water	99	mL

Material	Amount
Acetic acid, glacial	1	mL
Distilled water	99	mL

Tissue Sample

Protocol

Bring sections to water via xylene and ethanol.
Stain nuclei with an acid resistant nuclear stain such as Weigert’s iron hematoxylin.
Place into solution A for 1 minute.
Rinse with distilled water.
Place into solution B until collagen is decolorised.
Rinse quickly with distilled water.
Place into solution C for 5 minutes.
Rinse with distilled water.
Place into solution D until differentiated.
Rinse with distilled water.
Dehydrate with ethanol.
Clear with xylene and mount with a resinous medium.

Expected Results

Nuclei – black
Erythrocytes – yellow
Cytoplasm – red
Collagen – blue or green

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Gray, Peter. (1954)
The Microtomist’s Formulary and Guide.
Originally published by: The Blakiston Co.
Republished by: Robert E. Krieger Publishing Co.

March 30, 2023

Love0

Duprès’ Trichrome for Muscle and Collagen

By Carmen WongProtocols, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Duprès' Trichrome

for Muscle and Collagen

steps

materials

print

Materials

Gallego’s carbol fuchsin or
Duprès’ magenta
Solution A
Material Amount
Phosphomolybdic acid 1 g
Distilled water 100 mL
Solution B
Material Amount
Toluidine blue 0.25 g
Orange G 4 g
Oxalic acid 4 g
Distilled water 100 mL

Material	Amount
Phosphomolybdic acid	1	g
Distilled water	100	mL

Material	Amount
Toluidine blue	0.25	g
Orange G	4	g
Oxalic acid	4	g
Distilled water	100	mL

Tissue Sample

5µ paraffin sections of neutral buffered formalin fixed tissue are suitable. Other fixatives are likely to be satisfactory. Most trichrome stains benefit from mercuric chloride fixation. Treatment with picric acid may be less satisfactory due to the use of the basic dye, toluidine blue.

Protocol

Bring sections to water via xylene and ethanol.
Stain nuclei with either Gallego’s carbol fuchsin or Duprès’ magenta
Wash with water.
Place into solution A for 10 minute.
Rinse with distilled water.
Place into solution B for 1-5 minutes.
Drain.
Place into 95% ethanol until differentiated.
Dehydrate with 100% ethanol.
Clear with xylene and mount with a resinous medium

Expected Results

Nuclei – blue black (Gallego) or red (Duprès)
Erythrocytes – orange
Cytoplasm – red
Muscle – light green
Bone – dark green
Collagen – blue

Notes

The celestine blue-hemalum sequence or Weigert’s iron hematoxylin may be suitable at step 2.
Solution B contains both a basic and an acid dye.
Other basic dyes may be substituted for toluidine blue:
- Methyl green 0.3 g
- Methylene blue 0.3 g
- Malachite green 0.2 g

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Gray, Peter. (1954)
The Microtomist’s Formulary and Guide.
Originally published by: The Blakiston Co.
Republished by: Robert E. Krieger Publishing Co.
Citing:
Duprès, (1935)
Journal number 11425, v. 46, pp. 77

Note: Gray identifies journals by a number from the world list of scientific periodicals, ed. 2, 1934. Unfortunately, the journal listed as number 11425 is not identified by name in the list he provides. In a second reference to the differentiator used in this technique he gives the journal number as 14425. This may be the intended reference:
Duprès, (1935)
Monitore zoologico italiano, v. 46, pp. 77
Florence, Italy.

March 30, 2023

Love0

Dawes’ Trichrome for Fetal & Endocrine Tissue

By Carmen WongProtocols, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Dawes' Trichrome

for Fetal & Endocrine Tissue

steps

materials

print

Materials

Solution A-1

Material	Amount
Hematoxylin, 10% in 95% ethanol	16	mL
Ethanol, 95%	64	mL
Glycerol	80	mL

Solution A-2

Material	Amount
Ammonium ferric sulphate	24	g
Ferrous sulphate	24	g
Distilled water	100	mL

Solution A-3

Material	Amount
Azophloxine	1.2	g
Chromotrope 2R	0.2	g
Acetic acid, glacial	1.2	mL
Distilled water	160	mL

Preparation of Working Solution A

Make each A solution ensuring all solids are dissolved.
Combine solutions A-1 and A-2 and mix well.
Add solution A-3 to the combined solution.

Solution B

Material	Amount
Phosphomolybdic acid	1.5	g
Aniline blue or Methyl blue	3	g
Acetic acid, glacial	1.5	mL
Picric acid, sat. aqueous	150	mL
Distilled water	160	450

Tissue Sample

5µ paraffin sections of Bouin’s picric-acetic-formalin fixed fetal tissue, or endocrine tissue fixed in the Bouin’s mixture, but without the acetic acid.

Protocol

Bring sections to water via xylene and ethanol.
Place into solution A for 4 minutes.
Wash with tap water.
Place in solution B for 3 minutes.
Wash with distilled water.
Dehydrate quickly with 2 changes of 95% ethanol.
Rinse with absolute ethanol.
Clear with xylene and mount with a resinous medium.

Expected Results

Nuclei – black
Muscle – Orange-red
Collagen – Blue

Notes

The author states that both working solutions are stable and can be made in bulk. Multiply the amounts given by 10.
The method is suitable for staining sections in bulk.
The method is suitable as a counterstain for aldehyde fuchsin as well as being a general trichrome.

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Dawes, R. L. F., (1972),
A simple connective tissue stain suitable for foetuses and endocrine organs.
Medical Laboratory Technology, v. 29, Nº 1, p.27.

March 30, 2023

Love0

Papanicolaou’s Alcoholic Trichrome for Exfoliated Cells

By Carmen WongProtocols, Stain Type, Trichrome Staining, Trichrome, Multi-Step

Protocol

Papanicolaou's Alcoholic Trichrome

for Exfoliated Cells

steps

materials

print

This is the Papanicolaou technique commonly used to screen for cervical cancer.

Materials

Ehrlich’s or Harris’ alum hematoxylin or equivalent
Solution A (OG6)
Material Amount
Orange G 5 g
Phosphotungstic acid 0.15 g
Ethanol, 95% 1 L

Material	Amount
Orange G	5	g
Phosphotungstic acid	0.15	g
Ethanol, 95%	1	L

Solution B

Material	Variant
Material	EA 25		EA 36		EA 50		EA 65
Light green SF	2.2	g	2.25	g	0.45	g	1.125	g
Bismarck brown	0.6	g	0.5	g	0.5	g	0.5	g
Eosin Y	2.2	g	2.25	g	2.25	g	2.25	g
Phosphotungstic acid	1.7	g	2	g	2	g	2	g
Lithium carbonate	5	mg	5	mg	5	mg	5	mg
Ethanol, 95%	1	L	1	L	1	L	1	L

Preparation

For each variant:

Dissolve the bismarck brown in 100 mL ethanol, the light green in 450 mL ethanol, and the eosin Y in another 450 mL ethanol.
Combine the three solutions.
Add the acid and lithium carbonate.
Filter.

Tissue Sample

Ethanol-ether fixed smears of exfoliated epithelial cells.

Protocol

Bring smears to water via graded ethanols.
Stain nuclei with alum hematoxylin for 2 minutes.
Blue.
Rinse with 95% ethanol.
Place into solution A for 1 minute.
Rinse with 95% ethanol.
Place into solution B for 2 minutes.
Rinse well 95% ethanol.
Dehydrate rapidly with ethanol.
Clear with xylene and mount with a resinous medium.

Expected Results

Nuclei – blue
Cells – shades of orange, pink or green

Notes

Although the method calls for smears fixed in an equal parts mixture of ethanol and diethyl ether, smears fixed in 95% or absolute ethanol are completely satisfactory.
Lithium carbonate saturates in water at 1% at room temperature, so 0.5 mL contains 5 mg.
EA 65 is recommended for specimens with large amounts of mucus.

Safety Note

Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.

References

Gray, Peter. (1954)
The Microtomist’s Formulary and Guide.
Originally published by: The Blakiston Co.
Republished by: Robert E. Krieger Publishing Co.
Citing:
Papanicolaou, (1942)
Science, v.95, pp.438
Culling C.F.A., (1974)
Handbook of histopathological and histochemical techniques Ed. 3
Butterworth, London, UK.
Bancroft, J.D. and Stevens A. (1982)
Theory and practice of histological techniques Ed. 2
Churchill Livingstone, Edinburgh & London, UK.

March 30, 2023

Love0