B5
Buffered Formal Sublimate
Formula
Stock solution A
Material | Amount | |
---|---|---|
Mercuric chloride, sat aqueous | 6 | g |
Distilled water | 100 | mL |
Sodium acetate | 1.25 | g |
Stock solution B
Material | Amount | |
---|---|---|
Strong formalin (40% aqueous) | 10 | mL |
Add the strong formalin to the mercuric chloride solution just before it is used.
Description
Please read this article about the disposal of used mercuric chloride first.
Then read these comments about safe working with mercury compounds and cleanup of spills.
B5 and formal sublimate are very similar fixatives and B5 is sometimes referred to as buffered formal sublimate, since their formulae and fixation effect are so close. There are, however, two significant differences between them. The first is that the B5 working solution is made from two stock solutions just before being used and has a working life of about 16-24 hours. One of the stock solutions contains sodium acetate to ensure that the fixative has an alkaline pH, but this also ensures that the solution deteriorates.
The second difference comes about as a consequence of the first, and is that the fixative may not be recycled as formal sublimate may. The solution must be discarded after use. This should be done in accord with local regulations and consideration for the environment. In practice, there is little, if any, discernible difference between tissues fixed in B5 and those fixed in formal sublimate. In addition, formal sublimate is stable almost indefinitely and this stability makes it a better choice for intermittent or occasional use.
As with formal sublimate, B5 gives improved nuclear and cytoplasmic staining when compared to formalin mixtures. Nuclear structure is well defined, and deep staining is obtained with alum hematoxylin solutions and most basic dyes. The staining with acid dyes is enhanced. Trichrome stains do not require the sections to be further fixed in Bouin’s fluid nor treated with other solutions for staining enhancement. Although the staining results obtained are not as intense as those following Bouin’s solution, the demarcation of elements is sharp and the colors distinct.
Time
Very tiny pieces can be fixed in half an hour, although generally a minimum of about two hours is suggested. Some of the enhanced staining effects will be obtained after that time. Full fixation effects, including nuclear definition, are not obtained unless overnight fixation (16 hours) is used.
Due to the deterioration of the solution after 24 hours, the question of fixative tolerance is not an issue. Tissues should be removed before that time as the solution is not effective.
Aftertreatment
The high mercuric chloride content causes mercury pigment to form. This is conveniently removed with the iodine-thiosulphate sequence.
Secondary fixation
Although this fixative may be used as a secondary fixative following primary fixation in 10% formalin variants, it is not usually the fixative chosen. If it is used, overnight treatment of trimmed and fixed tissues will give most of the effects noted and enhance staining considerably.
Safety Note
Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.
References
- Bancroft, J. D. and Stevens, A.,
Theory and Practice of Histological Techniques, Ed. 2,
Churchill Livingstone, London, UK.