Ritter & Oleson's Colloidal Iron
for Acid Mucosubstances
Materials
Solutions
- Acetic acid, 2M (12%)
- Potassium ferrocyanide, 1% aqueous
- Hydrochloric acid, 1N aqueous
- Nito & Stoke’s colloidal iron suspension.
- Schiff’s reagent
Working colloidal iron
Material | Amount | |
---|---|---|
Colloidal iron suspension | 1 | vol |
Acetic acid, 2M | 1 | vol |
Perls’ solution
Material | Amount | |
---|---|---|
1% potassium ferrocyanide | 86 | mL |
Hydrochloric acid, 1N | 14 | mL |
Stock sodium acetate
Material | Amount | |
---|---|---|
Sodium acetate | 4 | g |
Ethanol, absolute | 1 | L |
Periodic acid
Material | Amount | |
---|---|---|
Periodic acid | 0.4 | g |
Stock sodium acetate | 5 | mL |
Distilled water | 100 | mL |
Reducing rinse
Material | Amount | |
---|---|---|
Potassium iodide | 1 | g |
Sodium thiosulfate | 1 | g |
Distilled water | 20 | mL |
Ethanol, absolute | 30 | mL |
Hydrochloric acid, 2N | 0.5 | mL |
Sulfite rinse
Material | Amount | |
---|---|---|
Distilled water | 100 | mL |
Potassium metabisulfite | 0.4 | g |
Hydrochloric acid, conc. | 1 | mL |
Tissue Sample
5µ paraffin sections of neutral buffered formalin fixed tissue are suitable. Other fixatives are likely to be satisfactory. Dichromate should be avoided.
Protocol
- Bring sections to water via xylene and ethanol.
- Place into the working colloidal iron suspension for 10 minutes.
- Wash with distilled water.
- Place into freshly made Perls’ solution for 10 minutes.
- Wash with distilled water.
- Rinse with 70% ethanol.
- Oxidise in periodic acid for 5 minutes.
- Rinse with 70% ethanol.
- Place in the reducing rinse for 5 minutes.
- Rinse with 70% ethanol.
- Place in Schiff’s reagent for 1 hour.
- Wash in sulfite rinses, 3 changes of 1½ minutes each.
- Wash with running tap water for 5 minutes.
- Optionally, counterstain with a hemalum such as Mayer’s for 1 minute, and blue.
- Dehydrate with ethanols.
- Clear with xylene and mount with a resinous medium.
Expected Results
- Acid mucopolysaccharides – blue
- Neutral mucopolysaccharides – red
- Glycogen – red
- Nuclei – blue
Notes
- The original method used a commercial colloidal iron preparation. This is still available. Nito & Stokes colloidal iron suspension is also suggested.
- Since this method depends on the staining of iron compounds with the prussian blue reaction, any hemosiderin present will also be stained. If this is a concern, a control section should be stained which has not been treated with colloidal iron. Material stained blue in both sections should be discounted.
- A PAS is integral to this method. A simpler PAS procedure would probably be as satisfactory. Acid mucosubstances will be stained blue in contrast to red neutral mucosubstances. However, they are often present as mixtures and the contrast may not be clear.
Safety Note
Prior to handling any chemical, consult the Safety Data Sheet (SDS) for proper handling and safety precautions.
References
- Humason, G. L., (1967)
Animal tissue techniques, Ed. 2
W. H. Freeman and Company, San Francisco, Ca, USA